نشانی: خ آزادی، خ بهبودی، نرسیده به نصرت، ساختمان بنیامین، پ145، طبقه 5 ، واحد18 – مجهز به (2) آسانسور و پارکینگ – تماس: 66097851 (7 خط), 66030825 -021

دفتر مرکزی: 66097851     مرکز تعمیرات: 66097859      شعبه شرق :77978135   شعبه هفت تیر: 88836102   شعبه جنوب: 55300568   شعبه غرب 44153186  شعبه شمال 26721443
شعبه اسلامشهر و رباط کریم 56746602

پیاده سازی وای فای iPad

پیاده سازی وای فای iPad بصورت مرحله به مرحله:

مرحله ۱

محتوای جعبه شامل:

  • IPad
  • کانکتور پایه در کابل USB
  • آداپتور برق ۱۰ وات USB
  • اسناد

It's here!  We got our hands on Apple's newest toy, the iPad, and we can't wait to see what's in it. So we won't— let's do this!

مرحله ۲

  • اندازه iPad شامل ۲۴۲٫۸ * ۱۸۹٫۷ * ۱۳٫۴ میلیمتر و وزن ۱٫۵ Ibs است.
  • صفحه عریض نور پس زمینه LED7 اینچ با تاچ است.
  • شماره مدل iPad A1219 است. iPad نسل ۳ دارای شماره مدل A1337 می باشد.

iPadContents of the box:

 

مرحله ۳

  • اسپادگر فلزی را بین نمایشگر و کیس عقب قرار داده تا iPad باز شود.
  • نمایشگر عاری از آرسنیک
  • عاری از BFR
  • نمایشگر LCD عاری از جیوه
  • عاری از PVC
  • محفظه گلس و آلومینومی قابل تبدیل

The iPad measures in at 242.8 x 189.7 x 13.4 mm and weighs in at 1.5 lbs.The significantly improved 9.7 inch  LED-backlit glossy widescreen with Multi-touch is perfect for all your movie watching, e-book reading needs.

مرحله ۴

  • قطعه نمایشگر را از کیس عقب بلند کنید.
  • در زیر شیار دو باتری پلیمر لی- یون بزرگ قرار دارد.

iPad, meet iPod original.More like: Flying saucer, meet horse & buggy.The iPad stacked upon a MacBook Pro, stacked upon a Dell laptop.

مرحله ۵

  • برای بلند کردن قطعه نمایشگر نیازی به گرم آن نمی باشد.

Insert a metal spudger between the display and the rear case to pry the iPad open.

مرحله ۶

  • قطعه نمایشگر و کیس عقب هر کدام ۳۵۰ گرم هستند و حدود ۵۰/۵۰ وزن را تشکیل می دهند.

Lift the display assembly away from the rear case.A first peek under the hood reveals two huge Li-ion Polymer batteries taking up most of the space in this device.

مرحله ۷

  • باتری ۳٫۷۵ ولت، ۲۴٫۸ وات ساعت به مدت ۱۰ ساعت کار می کند. در مقابل، آیفون ۳GS دارای باتری ۴٫۵۱ وات ساعت است و MacBooK Air دارای باتری ۴۰ وات ساعت می باشد.
  • منبع برق USB بطور خاص برای iPad تقویت می شود. ۱۰ وات دارد که با تکنولوژی Foxlink ساخته شده است.

Aaaand it's off. You have no idea how glad we are that this didn't require a heat gun.

مرحله ۸

  • کابل داده نمایشگر را قطع نمایید.
  • برداشتن این کانکتورها یک فرایند دو مرحله ای است. ابتدا نوار قفل را بلند کرده و سپس کابل را از سوکت خود بیرون بکشید.
  • کانکتور کابل داده نمایشگر مشابه با MacBook جدید است.

Wow, what gorgeous symmetry.The display assembly and rear case assembly are each 350g. Talk about 50/50 weight distribution.

مرحله ۹

  • کانکتور دکمه های قفل چرخشی و صفحه، برق و صدا را قطع کنید.

The display has a marking referencing Honeywell patent #5280371.It looks pretty barren, mostly because all the 3G equipment is missing.

مرحله ۱۰

  • برد اصلی با پیچ های تروکس T4 به پنل پشت متصل است.
  • اپل هرگز از پیچ های کوچک استفاده نمی کند.

Disconnecting the display data cable.

مرحله ۱۱

  • بالا و پایین برد منطقی دارای روکش EMI است.
  • برد منطقی با AT&S ساخته شده است.
  • برد منطقی حدود ۴٫۵ اینچ عرض و حدود ۶۰% عرض iPad است.

Disconnecting the volume, power, and screen rotation lock buttons connector.

مرحله ۱۲

  • روکش EMI را از برد منطقی بردارید.
  • این برد متفاوت از برد قبلی است که پوشش داده نشده است.
  • علامت روی A4:
  • N26CGM0T 1007 APL0398 33950084 YNL184A2 1004 K4X2G643GE
  • K4X2 شماره قطعه DRAM سامسونگ است.
  • رمزگشایی شماره قطعه نشان می دهد که ۲ گیگا بایت حافظه داخلی وجود دارد.
  • پردازنده A4 احتمالا توسط سامسونگ ساخته شده است.

The main board is secured to the back panel by T4 Torx screws.

مرحله ۱۳

شات برد منطقی منهای روکش فولادی EMI:

  • سازنده حافظه از توشیبا در پیاده سازی FCC به سامسونگ تغییر کرده است.
  • فلش ۸ گیگا بایت K9LCG08U1M سامسونگ
  • کنترل کننده I/O BCM5973
  • کنترل کننده صفحه تاچ CD3240A1
  • NXP: L061 01 4 ZSD950

Top and bottom of logic board with the EMI shield on.It looks like this board was made by AT&S.  We haven't seen Apple's PCB manufacturers brand their boards before.The logic board is about 4.5" wide, spanning about 60% of the iPad's width.

مرحله ۱۴

  • پیچ متصل شده به کابل کانکتور پایه واقع در کیس عقب را بردارید.
  • کابل داده RF با GPS مرتبط است.

Remove the EMI shield from the logic board, and presto!This board is markedly different than the pre-production board we uncovered.

مرحله ۱۵

  • کارت بلوتوث/ وای فای ۱۱n در کابل کانکتور پایه یکپارچه شده است.
  • زیر کیس شامل:
  • وای فای ۱۱n + بلوتوث ۲٫۱ + EDR و FM

A shot of the logic board minus the steel EMI shield.The manufacturer of the memory has switched from Toshiba on the FCC teardown to Samsung on this device.

مرحله ۱۶

  • قطعه اسپیکر بزرگتر از حد انتظار است:
  • کانکتور روی اسپیکرها و سایر قطعات از کانکتور مشاهده شده در لپ تاپ های MacBook هستند.
  • اسپیکرهای دوتایی تک صدا هستند. دو کانال کوچک صدا را مستقیم به ۳ پورت صدا در لبه پایین iPad انتقال می دهند. جک صدا نیز صدای استریو را ایجاد می کند.

A reverse shot of the logic board.

مرحله ۱۷

  • وزن کیس ۱۴۸ گرم است.
  • علائم پیل باتری شامل:
  • P11GA6-01-C01F
  • ۷۴۱-۰۰۳۱۰A +

Removing the single screw securing the dock connector cable to the rear case.Notably lacking from this RF/data cable is anything GPS related.  Check out the FCC iPad teardown to see where the GPS will be in the 3G device.Notably lacking from this RF/data cable is anything GPS related.  Check out the FCC iPad teardown to see where the GPS will be in the 3G device.

مرحله ۱۸

  • باتری iPad دارای حدود ۱٫۵ ظرفیت است.
  • دومین شات به کاور باتری اشاره کرده که مدار اتصال و حفاظت را برای هر باتری لی- پلی نشان می دهد.

Hiding under the case:The 802.11n WiFi/Bluetooth card is integrated into the dock connector cable.Broadcom BCM4329XKUBG 802.11n WiFi + Bluetooth 2.1 + EDR and FM

مرحله ۱۹

  • آنتن پشت لوگوی اپل همانند آنتن در iMacs جدید است.

The speaker assembly is larger than we expected:

مرحله ۲۰

  • گیرنده وایرلس باید با آنتن های متراکم دیده شود.

That's a hulk of a battery: it weighs 148g with the casing.Confirming our suspicions from yesterday, the battery integrates two separate 3.75V lithium polymer cells wired in parallel for such ample battery life.Battery cell markings:

مرحله ۲۱

  • دو پیچ را برداشته و جک هدفون را از کیس عقب بیرون بکشید.
  • جک هدفونن به کیس محکم چسبیده است.
  • میکروفن در سمت راست جک هدفون واقع است و از طریق کابل های داده همانند جک هدفون عبور می کند.

The iPad battery is a lot bigger than an iPhone 3G battery. The iPhone battery has about 1/5th the capacity provided by the iPad battery.The second shot shows the battery cover peeled back to expose the protection and connection circuitry for each Li-Poly battery.The third shot shows the other side of the battery board, which is stamped with Compeq.

مرحله ۲۲

  • قطعه نمایشگر باید پیاده شود.
  • کابل نواری نازک به برد درایور LED به چراغ های پس زمینه LED متصل است.
  • مدار درایور LED و اتصالات بین LCD واقعی و کانکتور کابل داده نمایشگر در برد مدار هستند.

The bare rear case. The antenna behind the apple logo looks just like the antenna on the new iMacs.A little prying with a metal spudger is required to separate the antenna from the rear case.Tolerances look pretty tight in the antenna compartment. Check out that pocket just for the antenna to sit in.

مرحله ۲۳

  • سنسور نور محیط در محفظه ای است که دوربین قرار دارد.

Here's a detail shot of both WiFi antennas. The wireless reception should be decent with such dense antennas.

مرحله ۲۴

  • نمایشگر بنظر از اطراف چسبینده است اما از چارچوب پلاستیکی برداشته می شود.
  • وزن قطعه نمایشگر شامل:
  • ۱۵۳ گرم LCD
  • ۱۹۳ گرم گلس جلو
  • گلس بنظر ضخیم است (۱٫۱۸ میلیمتر) در حالیکه آیفون حدود ۱٫۰۲ میلیمتر ضخامت دارد.

Remove a couple screws and pull the headphone jack out of the rear case.As with most portable devices, the headphone jack is very well fastened to the case.

مرحله ۲۵

  • بعضی از شماره های قطعه دیجیتالی کننده/ گلس شامل:
  • شماره قطعه در فریم نمایشگر:
  • HIA097NRFE0XA
  • در کابل دیجیتالی کننده:
  • ۸۲۱-۰۷۵۷-A

Ants on parade? Nope, just the T4 Torx screws holding each tab to the display assembly.Each clip holding the display assembly to the rear case is fastened down with its own T4 Torx screw.Luckily, the home button is a digital switch with its own circuit board, making replacement that much easier.

مرحله ۲۶

  • پس از برداشتن برچسب، شماره قطعات نزدیک پایین LCD دیده می شود:
  • شماره ها شامل:
  • A01327200 EP001A
  • ۱۰ ۱ ۲۵ S NE M213

Disassembling the display assembly.A thin ribbon cable connects the LED driver board to the LED backlights.The LED driver circuitry and the interconnects between the actual LCD and the display data cable connector are contained within the same circuit board.

مرحله ۲۷

وزن بسته آلومینیومی: ۱۳۸ گرم. وزن باتری: ۱۴۸ گرم. وزن LCD: 153 گرم. وزن گلس (و فریم): ۱۹۳ گرم. وزن اسپیکر: ۱۷ گرم. وزن برد اصلی: ۲۱ گرم. وزن سایر قطعات: ۲۷ گرم

The ambient light sensor lives in a compartment that a camera would love to call home.We suspect that this compartment was intended for the ambient light sensor all along, and the rumors of a camera that would fit here were overzealous. The layout does look very similar to the camera's view ports on the MacBook Pro 13" Unibody.

دیگر مقالات ما: برگرداندن تنظیمات دوربین به تنظیمات اصلی کارخانه

‫0/5 ‫(0 نظر)